Guide

Complete 1435 Monterey Rd Florence MS Guide (What’s There, What to Know, and How to Plan a Visit)

Complete 1435 Monterey Rd Florence MS Guide

Introduction

If you searched “1435 Monterey Rd Florence MS”, you’re likely trying to confirm what business or facility is located at that address, whether it’s open to the public, and what you should know before visiting—especially if your interest is firearms-related.

1435 Monterey Rd, Florence, Mississippi 39073 is widely associated with W. E. Birdsong & Associates, Inc. (Birdsong)—best known in the firearms community for its protective metal finishing work, including the Black-T® family of coatings. The same address also appears in public business directories and firearms-industry listings that identify Birdsong as a firearms manufacturer (FFL type 07 in at least some directory records). (black-t.com)

This guide is written to match the typical search intent:

  • Verify what’s at the address
  • Understand what services may be offered there
  • Know the practical “before you go” steps (contact, shipping/receiving, appointments)
  • Review firearm safety and secure-storage best practices if you’re transporting firearms for service

Note: If you are planning to ship or physically bring in a firearm for finishing, you must follow all federal/state/local laws and the provider’s receiving procedures.

Key Features and Specifications

Address identity (what’s located at 1435 Monterey Rd)

Public-facing sources consistently associate 1435 Monterey Rd, Florence, MS 39073 with W. E. Birdsong & Associates, Inc. (bbb.org)

You may see the name rendered in different ways depending on the directory:

  • W. E. Birdsong & Associates, Inc. (company name) (bbb.org)
  • Birdsong / Birdsong Mfg (commonly used label in some firearms/FFL directories) (ffls.com)

Why this address matters to gun owners

Birdsong is known for producing and applying protective coatings intended to reduce corrosion and external wear on metal parts.

From the manufacturer’s own description, Black-T® is described as a multi-step, chemically bonding coating process intended to provide protection against rust, corrosion, and external damage, and is used across multiple metal substrates (including steel, stainless, aluminum, titanium, etc.). (black-t.com)

The company’s “About” page also describes the origin story: development starting in the late 1970s with a focus on reducing firearm maintenance demands associated with corrosion. (black-t.com)

What you should confirm before visiting

Because many specialty firearms services operate by:

  • appointment windows,
  • limited receiving hours,
  • or “ship-in/ship-out” workflows,

you should confirm the following directly with the business before driving to the address:

  1. Public walk-in availability (some facilities are not set up like retail stores)
  2. Receiving process (drop-off vs. ship-in)
  3. Lead times for coating/finishing
  4. Accepted items (complete firearms vs. parts-only)
  5. Any required documentation (copy of ID/FFL where applicable)

Local context: Florence, Mississippi

Florence is in Rankin County, Mississippi, and the Monterey Road corridor is a rural/low-density area in that region—so expect “industrial/warehouse-style” or “shop/facility-style” destinations rather than a typical big-box retail environment. (topozone.com)

Practical Applications

Common reasons people search this address

In practice, searches for a specific street address like this generally fall into a few buckets:

  1. Finishing/coating inquiries

    • Corrosion protection for duty/defensive firearms
    • Environmental hardening for humid climates (Mississippi heat/humidity can accelerate surface rust if guns are stored improperly)

  2. Shipping destination verification

    • Confirming the correct “ship-to” location before sending serialized items or controlled parts

  3. Business verification and legitimacy checks

    • Confirming a real operating business exists at that address

Firearm transport and safe-handling best practices (for drop-off)

If you intend to transport a firearm to a gunsmith/finisher, basic best practices include:

  • Unload and clear the firearm before transport (remove magazine, clear chamber, visually/physically inspect).
  • Use a locked case during transport.
  • Separate ammunition from the firearm where practical.
  • Avoid administrative handling in public; keep the firearm secured until you are in a controlled environment.

For storage and community safety, Mississippi public health guidance emphasizes secure gun storage—including securing firearms at home and in vehicles. (msdh.ms.gov)

For businesses and FFLs, ATF guidance highlights secure firearms practices and encourages adherence to all applicable laws, and emphasizes security practices to prevent loss/theft and promote safe handling. (atf.gov)

Positioning your setup favorably: practical add-ons that support corrosion control

Even with a protective finish, real-world performance depends heavily on user maintenance and storage discipline. If your goal is to keep a working firearm reliable and protected long term, consider pairing a corrosion-resistant finish with:

  • A quality humidity-controlled safe (dehumidifier rod or desiccant system)
  • Vapor corrosion inhibitor (VCI) storage solutions for long-term storage
  • A vehicle lockbox if you must store a firearm in a vehicle (best practice is to avoid vehicle storage when possible)

If you’re outfitting a defensive handgun or a patrol rifle, a durable finish is only part of the reliability equation. Equally important are vetted magazines, consistent lubrication, and a repeatable storage routine.

(When selecting tactical accessories—lights, slings, optics mounts—prioritize proven duty-grade components, confirm torque specs, and use thread locker where appropriate. If you tell me the firearm platform, I can suggest a compatibility checklist.)

Expert Analysis

What makes an address-based search different from a “brand” search

When users search a full address, they usually want:

  • High-confidence identification (what is there?)
  • Actionability (can I visit? can I ship?)
  • Risk reduction (avoid sending a firearm/parts to the wrong location)

For 1435 Monterey Rd specifically, the strongest “signal” is the manufacturer’s own site identifying W. E. Birdsong & Associates, Inc. as the creator of Black-T® and related applications. (black-t.com)

How to vet “availability” responsibly

You asked for “pricing and availability” verification. For specialized firearms finishing, availability is not like retail inventory; it usually means:

  • whether the shop is currently taking new work, and
  • current turnaround time.

While the manufacturer site includes ordering/forms navigation, the most accurate availability confirmation is still direct contact and written work order confirmation. (black-t.com)

Important compliance note (shipping/receiving)

If you ship a firearm (or certain controlled components) for service, you must comply with:

  • carrier rules,
  • federal law,
  • Mississippi law,
  • and the receiving party’s policies.

ATF materials emphasize compliance with federal/state/local laws and safe handling/storage practices. (atf.gov)

Conclusion

1435 Monterey Rd, Florence, MS 39073 is most consistently associated with W. E. Birdsong & Associates, Inc., known for Black-T® protective firearm and metal finishing applications. (black-t.com)

If your intent is to visit or ship items to this address, your best next steps are:

  1. Confirm receiving method and hours (appointment vs. ship-in)
  2. Follow safe transport and secure storage practices
  3. Document your configuration and desired outcome (parts list, color/finish requirements, serialized item handling)

If you share what platform you’re working with (e.g., Glock 19, Remington 870, AR-15) and your environment (coastal humidity, duty use, range-only), I can lay out a finish + storage + accessory plan that prioritizes reliability and corrosion resistance.

Sources